Speed Up the Display Graphics (eg Zooming and Panning)

Last Updated: 19 November 2014          For: OptiSurface Designer V2 and higher

OptiSurface Designer can use discrete graphics card or an integrated graphics processor (IGP) with 3D capabilities to run the display graphics faster.  Most computer newer than 3 years old include these capabilities.

However, for stability reasons, the use of this hardware is turned OFF by default when you install OptiSurface Designer.  To turn it ON, go to Tools Menu > Options > Tick ON 'Enable Graphics Hardware Acceleration' > Apply > OK > Restart OptiSurface Designer.

This should speed your graphics up.  If you begin to have problems with Optisurface Designer crashing, you could tick OFF the 'Enable Graphics Hardware Acceleration' option or you may need to update your graphics card.



General

  1. Accuracy of RTK and RTX GPS
  2. Export To Field Level .gps File From UTM Coordinate System
  3. How Often Does The Earthworks Need To Be Done?
  4. GPS Accuracy Affected by Solar Activities
  5. Is OptiSurface Compatible with John Deere?
  6. Is GPS Accurate Compared to Laser?
  7. Is Cellular RTK Networks Accurate Enough for GPS Landforming?
  8. Trimble FMX User Guide
  9. Effects of Topsoil Removal and Redistribution on Irrigated Crop Production
  10. OptiSurface Designer on Apple Computer
  11. Earthworks Conversion Chart (Metric to Imperial) & Planar/OptiSurface Comparison
  12. How to Check Your System Specification
  13. OptiSurface Designer and John Deere's APEX
  14. Designs Generated with OptiSurface Designer
  15. Legend Way Off Screen
  16. Computer Only Running at 30% of the CPU Capacity
  17. French Manual for OptiSurface Designer
  18. Introduction to OptiSurface Landforming
  19. Using the Lay of the Land to Let Water Drain From A Field
  20. The Benefits by Using OptiSurface Design Software
  21. Draining Surface Water Using OptiSurface Designer
  22. Difference Between OptiSurface Designer Software and the Trimble and Deere Solutions
  23. OptiSurface and Auto-steer GPS: Key to Cost-Effective Erosion Control
  24. 800ha OptiSurfaced for Lateral Move and Drip Irrigation
  25. The Disadvantage of Practicing Multiple Grade Designs
  26. Why You Don't Want Ditches in Your Field...
  27. Connecting Pot Holes to Drains
  28. Dongle Or Licensing System
  29. OptiSurface Designer System Requirements
  30. Hardware List Providing the Best Service and Getting the Most out of OptiSurface Designer
  31. Computer Operating Systems
  32. One or Two Scrapers
  33. Base Station Mobility
  34. Base Unit Distance with GPS Receivers On Scrappers
  35. Getting the Information to the GPS Units on the Scrapers in the Field
  36. Downloading Maps to the Equipment / Machine
  37. Implementing Designs for the Field
  38. What Machine Control Hardware is OptiSurface Designer Compatible With?
  39. Base Station and Line of Sight with the Scrapers
  40. One Base Station with Multiple Scrapers
  41. Training Topics
  42. Two Legends Visible
  43. Auto-Backup Files
  44. Speed Up the Display Graphics (eg Zooming and Panning)

Feedback and Knowledge Base