Grade Of Best Fit And Splitting The Field Into Boundaries

Question:
Does OptiSurface Do A Grade Of Best Fit And Split The Field Into Boundaries?

Answer:
Currently we only can do one plane of best fit. In a few months we plan to allow multiple boundaries.

Update:
OSDv2.2.2 allows multiple boundaries, each having its own slope and direction.


Tips and Tricks

  1. Settlement In Low Spots That Were Filled
  2. NRCS SCS Engineering Field Handbook
  3. Water Control Structures
  4. Smoothing Distance
  5. Erosion Control Banks & Waterway
  6. Drainage Design Solutions of Different Topographies
  7. Runoff vs Slope
  8. Trimble Field Level II Do Not Show the .gps File
  9. Minimum Recommended Smoothing Distance For Export To Trimble Field Level 2
  10. GPS Base Station Setup For Best Vertical Accuracy
  11. How to Survey with Trimble FMX
  12. How Easy is OptiSurface to Use for the Average Farmer?
  13. Balancing Earthworks in the Field
  14. Landform Design Slopes and Smoothing
  15. Export Proposed Topography to AutoCAD
  16. Surface Irrigation Designs with Variable Slope
  17. OptiSurface Designer Import and Export Format
  18. Importing Multiple Survey Files to OSD
  19. Can Drone Or LIDAR Surveys be used with OptiSurface?
  20. Calculation Grid Spacing and Export Grid Spacing
  21. How to Survey a Field for Landforming Design
  22. Loading .gps File in FMX
  23. Designing a Field in Sections
  24. Using an Old OSD File versus a New Survey
  25. No Master Benchmark on Imported Survey File
  26. Displaying Secondary Benchmarks
  27. Import Error for xyz File Due to Encoding Format
  28. OptiSurface4D: Bounded By Ridges
  29. Can OptiSurface handle curved rows in Drainage Analysis & Runoff Analysis?
  30. Reverse Grades to Main Slope
  31. Measuring Culvert Invert Level
  32. Surveying a 1000-Ha Field
  33. GPS Coordinate System Check
  34. Does A Normal UTM Zone Coordinate Need To Be Trimmed To x Digits?
  35. Can You Import Data Directly From GPS System?
  36. Converting Latitude/Longitude to Easting/Northing
  37. Surveying With Any GPS Equipment and Exporting to a gps file for the Trimble FMX
  38. DGPS Post Treating System with 5cm Precision For Landforming
  39. Exporting to Trimble FMX Field Level
  40. Can I Survey with a GPS System on an ATV?
  41. Standard NMEA GPGGA txt File to Import into OptiSurface Designer
  42. 900 Acres: Cut that large survey down.
  43. Export Options for Data Layers
  44. Import Two or More Survey Files to Reach Minimum Area
  45. Different Row Slope Directions In One Field
  46. Does OptiSurface allow for multiple grade breaks per design, taildrains roads, pads etc?
  47. Can I View DTM/Topography In Plan View Or 3D Type View When Doing A Design?
  48. Adjust the Bands in the Legend
  49. Design for a 1000-Ha Field
  50. Would It Be Possible That The Numbers In The Boundary Zone Appear In The New Subzone Created?
  51. Grade Of Best Fit And Splitting The Field Into Boundaries
  52. Acceptable Minimum Slopes
  53. Incorrect Area in OptiSurface
  54. Valley Subzone Not Behaving as Expected
  55. Difference Between Breaklines And Subzones
  56. Alignment of Furrow/Bed Direction with OptiSurface Design Mainslope Direction
  57. Subzones Settings Over Ride Boundary Zone Settings
  58. Printing the Maps
  59. Print Size

Feedback and Knowledge Base