Loading .gps File in FMX

Last Updated: 18 June 2018         For: OptiSurface Designer .gps File

Question:
Do you have a guide on how to put up the design in the FMX?

Answer:
You want to follow the same procedure as "Working With Multiplane designs' in the FMX manual to load the .gps file.  If you have FMX Firmware version 7 or higher, then create a new field and operation with NO Master Benchmark in it and then open that Field and load the design.

Remember to load the design in a new field without any benchmarks.  Be sure to re-bench after importing the design.

Below show some clips from FMX User Guide v7.2a

1. Copying the .gps File Into the USB Stick


2. Field Level II Setup

3. Creating a Field


Open the Existing Field in FMX that was used during the survey. If this does not exist, create a new field and open it.

4. Working with .gps Files




5. Re-benching
















Feedback and Knowledge Base