General

  1. Export To Field Level .gps File From UTM Coordinate System

  2. How Often Does The Earthworks Need To Be Done?

  3. GPS Accuracy Affected by Solar Activities

  4. Is OptiSurface Compatible with John Deere?

  5. Is GPS Accurate Compared to Laser?

  6. Is Cellular RTK Networks Accurate Enough for GPS Landforming?

  7. Error 5013: Activation Failed

  8. Trimble FMX User Guide

  9. Effects of Topsoil Removal and Redistribution on Irrigated Crop Production

  10. Error Code: ERR_FILE_NOT_FOUND

  11. OptiSurface Designer on Apple Computer

  12. Earthworks Conversion Chart (Metric to Imperial) & Planar/OptiSurface Comparison

  13. How to Check Your System Specification

  14. OptiSurface Designer and John Deere's APEX

  15. Designs Generated with OptiSurface Designer

  16. Legend Way Off Screen

  17. Error 5022: System Clock Invalid

  18. Error 9103: Exception Code 8 - Licence Validation Failed

  19. Error R6030: CR7 Not initialized

  20. Error Code 2: OSD Activation Failed

  21. Computer Only Running at 30% of the CPU Capacity

  22. French Manual for OptiSurface Designer

  23. Introduction to OptiSurface Landforming

  24. Using the Lay of the Land to Let Water Drain From A Field

  25. The Benefits by Using OptiSurface Design Software

  26. Draining Surface Water Using OptiSurface Designer

  27. Difference Between OptiSurface Designer Software and the Trimble and Deere Solutions

  28. OptiSurface and Auto-steer GPS: Key to Cost-Effective Erosion Control

  29. 800ha OptiSurfaced for Lateral Move and Drip Irrigation

  30. The Disadvantage of Practicing Multiple Grade Designs

  31. Why You Don't Want Ditches in Your Field...

  32. Connecting Pot Holes to Drains

  33. Dongle Or Licensing System

  34. OptiSurface Designer System Requirements

  35. Hardware List Providing the Best Service and Getting the Most out of OptiSurface Designer

  36. Computer Operating Systems

  37. One or Two Scrapers

  38. Base Station Mobility

  39. Base Unit Distance with GPS Receivers On Scrappers

  40. Getting the Information to the GPS Units on the Scrapers in the Field

  41. Downloading Maps to the Equipment / Machine

  42. Implementing Designs for the Field

  43. What Machine Control Hardware is OptiSurface Designer Compatible With?

  44. Base Station and Line of Sight with the Scrapers

  45. One Base Station with Multiple Scrapers

  46. Training Topics

  47. Two Legends Visible

  48. Auto-Backup Files

  49. Speed Up the Display Graphics (eg Zooming and Panning)

Feedback and Knowledge Base