www.optisurface.com

OptiSurface Support Center

Search for any help questions or topics.

Tips and Tricks

Acceptable Minimum Slopes

Valley Subzone Not Behaving as Expected

Not Seeing the .gps File on Trimble FMX

GPS Coordinate System Check

Drain Floor Control File

Post Landforming Assessment

Reverse Grades to Main Slope

Slight Shift in Google Background Image

Coordinate System Differences with Different GPS Systems

Difference Between Breaklines And Subzones

Surveying a 1000-Ha Field

900 Acres: Cut that large survey down

Design for a 1000-Ha Field

Measuring Culvert Invert Level

Setting Graphics Card for OptiSurface Designer

Settlement In Low Spots That Were Filled

Smoothing Distance

Alignment of Furrow/Bed Direction with OptiSurface Design Mainslope Direction

Erosion Control Banks & Waterway

Can I Survey with a GPS System on an ATV?

Import Two or More Survey Files to Reach Minimum Area

Water Control Structures

Converting Latitude/Longitude to Easting/Northing

NRCS SCS Engineering Field Handbook

Drainage Design Solutions of Different Topographies

Runoff vs Slope

Map View Options

Importing Multiple Survey Files to OSD

Minimum Recommended Smoothing Distance For Export To Trimble Field Level 2

Surface Irrigation Designs with Variable Slope

Export Proposed Topography to AutoCAD

Landform Design Slopes and Smoothing

Balancing Earthworks in the Field

How to Survey with Trimble WM-Survey

Different Row Slope Directions In One Field

GPS Base Station Setup For Best Vertical Accuracy

Calculation Grid Spacing and Export Grid Spacing

Displaying Secondary Benchmarks

How to Survey a Field for Landforming Design

Using an Old OSD File versus a New Survey

No Master Benchmark on Imported Survey File

OptiSurface4Way: Bounded By Ridges

Export Options for Data Layers

The Disadvantage of Practicing Multiple Grade Designs

Multiple Grade Breaks (taildrains, roads, pads, etc.)

Grade Of Best Fit And Splitting The Field Into Boundaries

Would It Be Possible That The Numbers In The Boundary Zone Appear In The New Subzone Created?

Adjust the Bands in the Legend

Subzones Settings Over Ride Boundary Zone Settings

Speed Up the Display Graphics (eg Zooming and Panning)